Your plumbing system at home is a complex one that ensures your proper water supply distribution and wastewater disposal. It consists of fixtures, fittings, and components that can be subject to wear and tear over the years. However, with constant use and abuse, the chances are that some plumbing parts can get worn out or completely damaged. If it’s extensive damage, the logical course of action is to hire an expert plumber to remedy the problem. On the other hand, if it’s a minor one, you can resort to a quick and easy DIY fix.
If you don’t know how to proceed with your household plumbing works, here’s our beginner’s guide for you:
1. Replace components in your bathroom
Tackling pipelines in your bathroom can be a bit messy, whether it is the parts under the sink or shower. These areas typically cause minor damages to your plumbing system, so you can go ahead and handle them yourself. For instance, you will first need to replace your toilet’s flapper or faucet’s cartridge by getting a package and reading the easy-to-follow instructions for replacement. From there, you can install the replaced parts by yourself, and you’re all good!
2. Get rid of clogs without the use of chemicals
Another simple plumbing problem to tackle is a clogged drain. Whether it is the drain connected to your kitchen sink or shower, you can resort to household products. There’s no need to invest in costly chemical drain cleaners in such cases, as all you need are a hot-water-vinegar-baking soda solution and a plunger or a drain snake. Simply pour the solution, and then use the plunger. If it doesn’t work, you can use the drain snake to pull out the clog—it’s that simple and easy!
3. Inspect your showerhead for potential problems
If you have a dripping showerhead, you can perform the plumbing job by using a thread tape. It’s possible that the drips may have come from threads that are not tightly connected. All it takes is to unscrew the showerhead, apply the new tape, and re-attach to stop the dripping. Now, if the showerhead is clogged, soak it in a bowl with warm water and vinegar; that can make all the difference!
4. Use thread tape for pipe threads
It’s inevitable for the thread sealing compound to drip and smear over time. Thread tape is a valuable resource for any DIY plumbing jobs involving pipe threads around the house. It’s best to buy a multi-purpose tape for optimal application and easy handling. While you’re at it, wrap the tape by rolling it around the threads in a counterclockwise position, and be sure to do so three times for the best results.
At this point, you now know how to pull off some plumbing works for minor problems. As mentioned, you can replace components in your toilet, get rid of clogs without chemical use, inspect your showerhead for potential issues, and use thread tape for pipe threads. At the same time, be sure to follow the practical steps discussed as they are straightforward and simple to follow. That way, you can handle some household plumbing works in case of an emergency situation!
Are you confronted with major plumbing problems? You’ve come to the right place, as we’re your go-to online directory of the best plumbers in Charlotte, NC. Browse our website for more plumbing tips and tricks today or have a list of local plumbing experts!